Skip to content

3B30 Submunition

3D Prints > Submunitions > 3B30 Submunition

The 3B30 Submunition is a 3.56 hour print with an estimated cost to print of €0.80 + parts and labor.

The print uses layer-height-based filament switching to change colors during printing of the shell.stl part. The color order for the shell can be switched as real 3B30 submunitions often appear with varying shades of yellowish-silver.

  • Insert copper-insert.stl into shell.stl using alignment tabs. Push up on the copper-insert.stl from below, and lightly screw together from above until parts fit snugly. The screw will self tap into the hole. Do not overtighten or it will strip the threads.
  • Screw top.stl on to shell.stl
  • Screw fuze.stl in to top.stl
  • Punch a hole through the center at the middle of each strip of ribbon. Push the screw through the center of both ribbons and screw into fuze.stl with light force.

Copy object namekey for print order:

3b30-submunition

STL Files

Image Part Name Filament
30mm-vog-17-projected-grenade.md STL render copper-insert.stl ■ eSUN Silk Copper
30mm-vog-17-projected-grenade.md STL render fuze.stl ■ eSUN Silk Silver
30mm-vog-17-projected-grenade.md STL render shell.stl ■ eSUN Silk Silver
30mm-vog-17-projected-grenade.md STL render top.stl ■ eSUN Silk Silver

Build Plates

plate_1.png

plate_1.png

plate_2.png

plate_2.png

Parts

Quantity Part Notes
2 16mm-off-white-ribbon-60mm
2 m3-8-hex-screw