Skip to content

TM-62P3 Landmine

3D Prints > Landmine > TM-62P3 Landmine

The TM-62P3 Landmine is a 0.46 hour print with an estimated cost to print of €0.28 + parts and labor.

  • Place mine-top.stl on the top of mine-body.stl, and slowly screw together, use included tool.stl if necessary
  • Place o-ring.stl over fuze-well.stl and screw into mine-body.stl
  • Connect fuze-well-insert.stl to the interior section of fuze-well.stl
  • Place gasket.stl onto the upper section of fuze-well.stl

Copy object namekey for print order:

tm-62p3-landmine

STL Files

Image Part Name Filament
tm-62m-landmine.md STL render tm-62p3-landmine-fuze-well-insert.stl ■ eSUN PLA+ Brown
tm-62m-landmine.md STL render tm-62p3-landmine-fuze-well.stl ■ eSUN PLA+ Brown
tm-62m-landmine.md STL render tm-62p3-landmine-gasket.stl ■ Bambu PLA Basic Black
tm-62m-landmine.md STL render tm-62p3-landmine-mine-body.stl ■ Polymaker Polylite PLA Army Green
tm-62m-landmine.md STL render tm-62p3-landmine-mine-top.stl ■ Polymaker Polylite PLA Army Green
tm-62m-landmine.md STL render tm-62p3-landmine-o-ring.stl ■ Bambu TPU 95A HF Black
tm-62m-landmine.md STL render tm-62p3-landmine-tool.stl ■ Bambu PLA Basic Black

Build Plates

plate_1.png

plate_1.png

plate_2.png

plate_2.png

plate_3.png

plate_3.png