PTM-3 Landmine
3D Prints > Submunitions > PTM-3 Landmine
The PTM-3 Landmine is a 12.61 hour print with an estimated cost to print of €10.26 + parts and labor.
- Screw
fuze_insert.stlinto the top offuze.stl - Connect
battery_cover.stlto the side offuze.stl(use needlenose pliers to assist) - Insert x4 alignment tabs into the open end of
mine_body_base.stland connectmine_body_top.stl - Screw x4 M3x18mm screws to secure
mine_body_top.stltomine_body_base.stl - Carefully insert
fuze.stlinto the open end ofmine_body_top.stl
Known Issues
- The vertical tabs near the fuze on
mine_body_top.stlcan snap off. This part can be re-printed and replaced.
Copy object namekey for print order:
STL Files
Build Plates
plate_1.png
plate_2.png
plate_3.png
Parts
| Quantity | Part | Notes |
|---|---|---|
| 4 | m3-18-hex-screw |