Skip to content

POM-2R Landmine

3D Prints > Landmine > POM-2R Landmine

The POM-2R Landmine is a 4.74 hour print with an estimated cost to print of €3.55 + parts and labor.

  • Insert the threaded end of pom2r_tube.stl into pom2r_top.stl and connect the two parts using pom2r_threads.stl (the coarse threads)
  • Insert pom2r_insert.stl in the small hole on top of pom2r_top.stl and secure with hot glue gun
  • Screw pom2r_shipping_cap.stl on top of pom2r_threads.stl
  • Press pom2r_bottom_cap.stl onto the base of pom2r_tube.stl

Known Issues

  • Printing mechanical parts such as threaded pieces with silk PLA is not advised

Copy object namekey for print order:

pom-2r-landmine

STL Files

Image Part Name Filament
pom-2-landmine.md STL render pom2r_bottom_cap.stl ■ Bambu PLA Basic Silver
pom-2-landmine.md STL render pom2r_insert.stl ■ Bambu PLA Basic Silver
pom-2-landmine.md STL render pom2r_shipping_cap.stl ■ Aurapol PLA Royal Red
pom-2-landmine.md STL render pom2r_threads.stl ■ Bambu PLA Basic Silver
pom-2-landmine.md STL render pom2r_top.stl ■ Polymaker PolyLite Dark Grey Green
pom-2-landmine.md STL render pom2r_tube.stl ■ Polymaker Polylite PLA Army Green

Build Plates

plate_1.png

plate_1.png

plate_2.png

plate_2.png

plate_3.png

plate_3.png

plate_4.png

plate_4.png

Parts

Quantity Part Notes
1 2mm-metal-wire-420mm-length Steel or aluminum wire