POM-2 Landmine
3D Prints > Submunitions > POM-2 Landmine
The POM-2 Landmine is a 5.31 hour print with an estimated cost to print of €2.91 + parts and labor.
- Place
fuze.stlon top oftop.stland connect with 2x M3 16mm screws from above - Place
top_bracket.stlon top offuze.stland connect with 2x M3 16mm screws from each side, through the vertical tabs ontop.stlto create fuze assembly - Connect each
fin.stltohinge_mount.stlwith M3 20mm self-tapping screw. Note the orientation of hinges and fins (see detail inassembly_10.jpg) Screw must enter from right to left (seeassembly_08.jpg) - Place fin assembly on top of
base_plate.stl - Insert threaded end of
shell.stlfrom above and screw together with light force (see detail inassembly_13.jpg) - Connect fuze assembly to
shell.stlto complete the POM-2 landmine model
Copy object namekey for print order:
STL Files
Build Plates
plate_1.png
plate_2.png
plate_3.png
Parts
| Quantity | Part | Notes |
|---|---|---|
| 4 | m3-16-countersunk-screw | |
| 6 | m3-20-countersunk-screw |