Skip to content

POM-3 Landmine

3D Prints > Submunitions > POM-3 Landmine

The POM-3 Landmine is a 7.03 hour print with an estimated cost to print of €4.13 + parts and labor.

  • Stack in this order and screw these three parts together with 3x M3x14 screws,

  • fuze_cap_top.stl

  • optional parachute clip (insert first before attaching screws)
  • fuze_cap_midsection.stl
  • fuze_cap_base.stl

  • Connect the fins to the hinge_mount.stl. For step by step assembly see photos assembly_11.jpg through assembly_17.jpg. Note two fins have a different shape (photo assembly_17.jpg)

    Parts needed:

  • hinge_mount.stl

  • hinge_ring.stl
  • 4x fin.stl
  • 1x fin_left.stl
  • 1x fin_right.stl

  • Connect hinge assembly to tube.stl using baseplate.stl. Sensor connector should be pointing upwards

  • Connect sensor_tube.stl to the sensor connector of the hinge assembly, with the hole toward the base

  • Connect fuze_attachment.stl to fuze.stl using 2x M3x10mm screws

  • Insert the fuze assembly into both the tube and the sensor tube

  • Place the fuze-cap assembly on top of the fuze assembly

  • Insert sensor_4mm.stl into the underside of hinge_mount.stl beneath the sensor_tube.stl attachment point

Known Issues

  • The overall scale of the model and some details deviate slightly from the FFE scan model

Changelog

2025-11-04

  • fuze_attachment.stl
  • updated: stl, readme

Copy object namekey for print order:

pom-3-landmine

STL Files

Image Part Name Filament
pom-2r-landmine.md STL render baseplate.stl ■ eSUN Silk Bronze
pom-2r-landmine.md STL render fin_left_v2.stl ■ Polymaker Polylite PLA Army Green
pom-2r-landmine.md STL render fin_right_v2.stl ■ Polymaker Polylite PLA Army Green
pom-2r-landmine.md STL render fin_v2.stl ■ Polymaker Polylite PLA Army Green
pom-2r-landmine.md STL render fuze_attachment.stl ■ eSUN PLA+ Brown
pom-2r-landmine.md STL render fuze_cap_base.stl ■ Bambu PLA Basic Silver
pom-2r-landmine.md STL render fuze_cap_midsection.stl ■ Bambu PLA Basic Silver
pom-2r-landmine.md STL render fuze_cap_top.stl ■ Polymaker PolyLite Dark Grey Green
pom-2r-landmine.md STL render fuze.stl ■ Bambu PLA Basic Silver
pom-2r-landmine.md STL render hinge_mount.stl ■ Polymaker PolyLite Dark Grey Green
pom-2r-landmine.md STL render hinge_ring.stl ■ Polymaker PolyLite Dark Grey Green
pom-2r-landmine.md STL render sensor_4mm.stl ■ Bambu PLA Basic Silver
pom-2r-landmine.md STL render sensor_tube.stl ■ eSUN Silk Bronze
pom-2r-landmine.md STL render tube.stl ■ Polymaker PolyLite Dark Grey Green

Build Plates

plate_1.png

plate_1.png

plate_2.png

plate_2.png

plate_3.png

plate_3.png

plate_4.png

plate_4.png

plate_5.png

plate_5.png

Parts

Quantity Part Notes
1 2mm-metal-wire-100mm-length Optional. Steel or aluminum wire for the parachute connection
2 m3-10-countersunk-hex-screw
3 m3-14-countersunk-hex-screw