AO-2.5 RT/RTM Submunition
3D Prints > Submunitions > AO-2.5 RT/RTM Submunition
The AO-2.5 RT/RTM Submunition is a 11.44 hour print with an estimated cost to print of €5.87 + parts and labor.
- Connect 1x
fuze_coupler.stlto eachdetonator_housing.stland make sure to screw together completely - Connect 1x
detonator_housing.stlto eachhalf_shell.stland make sure to screw together completely (a pen or screwdriver can help tightening the part) - Align the two tabs of each
fin.stlwith the two holes offin_ring.stland press firmly to snap the parts together - Snap the arming fins assembly over one of the
half_shell.stl - Insert and press
fuze.stlintofuze_housing.stlto create the fuze assembly - Place
separation_charge.stlflat side down inside eachfuze_coupler.stland insert the fuze assembly above it - With all parts installed, press 1x
half_shell.stltogether with the otherhalf_shell.stlfor the complete submunition assembly
Known issues:
-
The replica fuze is an approximation of the original
-
The delay charge and detonator are currently not modeled as printable parts
Copy object namekey for print order:
STL Files
Build Plates
plate_1.png
plate_2.png
plate_3.png
plate_4.png