Skip to content

PMN-2 Landmine

3D Prints > Landmine > PMN-2 Landmine

The PMN-2 Landmine is a 5.62 hour print with an estimated cost to print of €4.43 + parts and labor.

  • Place top_plate.stl into top.stl with the four circular impressions facing up, top_plate.stl should snap in place in the center
  • Insert the cross shape of pressure_plate.stl through the opening in top_plate.stl
  • Connect threaded end of base.stl to top.stl and slowly screw the parts together
  • Glue the flat end of each insert into the flat holes around the perimeter of body.stl. First place insert1.stl in the smallest hole, next insert2_a.stl with insert2_b.stl in the medium hole, and insert3.stl in the large hole

Known Issues

  • Recommended to leave the model fully assembled at all times to prevent parts from warping due to heat and/or sun exposure

Copy object namekey for print order:

pmn-2-landmine

STL Files

Image Part Name Filament
pma-2-landmine.md STL render pmn2_base_v2.stl ■ Aurapol PLA Leaf Green
pma-2-landmine.md STL render pmn2_insert1.stl ■ Aurapol PLA Leaf Green
pma-2-landmine.md STL render pmn2_insert2_a.stl ■ Aurapol PLA Leaf Green
pma-2-landmine.md STL render pmn2_insert2_b.stl ■ eSUN Silk Silver
pma-2-landmine.md STL render pmn2_insert3.stl ■ Aurapol PLA Leaf Green
pma-2-landmine.md STL render pmn2_pressure_plate.stl ■ Bambu TPU Black
pma-2-landmine.md STL render pmn2_top_plate.stl ■ Aurapol PLA Leaf Green
pma-2-landmine.md STL render pmn2_top.stl ■ Aurapol PLA Leaf Green

Build Plates

plate_1.png

plate_1.png

plate_2.png

plate_2.png

plate_3.png

plate_3.png