M42 Submunition
3D Prints > Submunitions > M42 Submunition
The M42 Submunition is a 1.49 hour print with an estimated cost to print of €0.72 + parts and labor.
- Insert
shell_insert.stlintoshell.stlusing alignment tabs, with holes facing toward the holes at the top of the shell. - Slide
top_mount_insert.stlthrough the center hole oftop_mount.stl - Connect the top mount to the shell using 2x M3x30 screws until the part fits snugly. Do not overtighten or it will strip the threads.
- Glue the ends of the ribbon loop together, punch a hole through both layers, and screw into the top mount through the center hole using 1x M3x30 screw.
Copy object namekey for print order:
STL Files
| Image | Part Name | Filament |
|---|---|---|
|
shell-insert.stl | ■ eSUN Silk Copper |
|
shell.stl | ■ Bambu PLA Metal Iron Gray Metallic |
|
top-mount-insert.stl | ■ Bambu PLA Basic Silver |
|
top-mount.stl | ■ Bambu PLA Basic Silver |
Build Plates
plate_1.png
plate_2.png
plate_3.png
Parts
| Quantity | Part | Notes |
|---|---|---|
| 1 | 16mm-off-white-ribbon-400mm | |
| 3 | m3-30-hex-screw |