Skip to content

PTAB-1M Submunition

3D Prints > Submunitions > PTAB-1M Submunition

The PTAB-1M Submunition is a 6.12 hour print with an estimated cost to print of €3.33 + parts and labor.

  • Slide the first fin.stl on to fin_mount.stl from above, it should extend in a clockwise direction
  • Insert curved end of second fin.stl through opening in the prevous attached fin and slide on to fin_mount.stl
  • Continue for all 6x fin.stl. To complete the assembly the end of the first fin must be removed from the mount to slide into the opening of the sixth fin (see diagram)
  • Insert fin_mount_screw.stl into fin_mount.stl from above
  • Gently push and snap fin_mount.stl on to payload_a.stl (apply glue to the connection to keep from rotating)
  • Connect payload_a.stl to payload_b.stl
  • Connect base.stl to payload_b.stl

Known issues

  • Gently and slowly flex the fins when attaching to prevent from snapping

Copy object namekey for print order:

ptab-1m-submunition

STL Files

Image Part Name Filament
pomz-2m-landmine.md STL render ptab1m_base.stl ■ Bambu PLA Basic Silver
pomz-2m-landmine.md STL render ptab1m_fin_mount_screw.stl ■ Bambu PLA Basic Silver
pomz-2m-landmine.md STL render ptab1m_fin_mount.stl ■ Bambu PLA Basic Silver
pomz-2m-landmine.md STL render ptab1m_fin.stl ■ Bambu PLA Basic Black
pomz-2m-landmine.md STL render ptab1m_payload_a.stl ■ Bambu PLA Basic Bronze
pomz-2m-landmine.md STL render ptab1m_payload_b.stl ■ Bambu PLA Basic Bronze

Build Plates

plate_1.png

plate_1.png

plate_2.png

plate_2.png

plate_3.png

plate_3.png