Skip to content

OZM-72 Landmine

3D Prints > Landmine > OZM-72 Landmine

The OZM-72 Landmine is a 5.61 hour print with an estimated cost to print of €5.36 + parts and labor.

  • Insert plug1.stl and plug2.stl in the outer holes on top of base_solid.stl (needle-nose pliers can be used as a tool for tightening the plugs)
  • Insert center_plug.stl in the center hole of base_solid.stl
  • Connect a key-ring to the center_plug.stl
  • Combine with muv2_fuze or muv4_fuze

Additional Part Required:

  • Four-part print for the mine, also includes print files for the MUV-2 fuze

Copy object namekey for print order:

ozm-72-landmine

STL Files

Image Part Name Filament
ofsp-08-a133.md STL render ozm72_base_hollow.stl ■ Polymaker Polylite PLA Army Green
ofsp-08-a133.md STL render ozm72_center_plug.stl ■ Polymaker Polylite PLA Army Green
ofsp-08-a133.md STL render ozm72_plug1.stl ■ Polymaker Polylite PLA Army Green
ofsp-08-a133.md STL render ozm72_plug2.stl ■ Polymaker Polylite PLA Army Green

Build Plates

plate_1.png

plate_1.png

Parts

Quantity Part Notes
1 1pt6-x-25mm-metal-wire
2 30mm-key-ring