TMRP-6 Landmine
3D Prints > Landmine > TMRP-6 Landmine
The TMRP-6 Landmine is a 5.92 hour print with an estimated cost to print of €4.32 + parts and labor.
- Place
mine-base.stlon the bottom ofmine-body.stl, and slowly screw together - Connect
fuzewell.stlto the top ofmine-body.stl - Lightly pull apart the two ends of
safetyring.stland with the small notch facing downward, place aroundfuzewell.stl - Attach pull-ring and pin to
safetyring.stl - Connect
fuze.stltofuzewell.stl - Connect
fuzetrigger.stlandfuzepin.stltofuze.stl - Attach optional part
fuzesafety.stltofuzetrigger.stl, rotate to securefuzepin.stlin the unarmed position - Place
handle_part1.stlon top ofhandle_part2.stland connect using 2xhandle_pin.stl - Connect the handle to
mine-body.stl
Copy object namekey for print order: