Skip to content

9N24 Submunition

3D Prints > Submunitions > 9N24 Submunition

The 9N24 Submunition is a 6.94 hour print with an estimated cost to print of €6.61 + parts and labor.

  • Connect 9n24_fuze.stl to 9n24_payload.stl
  • Connect 9n24_tailfin_coupler.stl to 9n24_payload.stl`
  • Attach x4 9n24_tailfin.stl to 9n24_tailfin_mount.stl using M3 self-tapping screws (see assembly photos for correct orientation)
  • Slide 9n24_tailfin_mount.stl over 9n24_tailfin_spindle.stl (see assembly photos for correct orientation) to create tailfin assembly
  • Attach tailfin assembly to 9n24_tailfin_coupler.stl
  • Loop and tie white ribbons (length TBD) to each 9n24_tailfin_tailfin.stl and 9n24_tailfin_mount.stl (see assembly photos for details)

Copy object namekey for print order:

9n24-submunition

STL Files

Image Part Name Filament
9n235-submunition.md STL render 9n24_fuze.stl ■ Bambu PLA Basic Silver
9n235-submunition.md STL render 9n24_payload.stl ■ Bambu PLA Basic Gray
9n235-submunition.md STL render 9n24_tailfin_coupler.stl ■ Bambu PLA Basic Gray
9n235-submunition.md STL render 9n24_tailfin_mount.stl ■ Bambu PLA Metal Iron Gray Metallic
9n235-submunition.md STL render 9n24_tailfin_spindle.stl ■ Bambu PLA Basic Silver
9n235-submunition.md STL render 9n24_tailfin.stl ■ Bambu PLA Basic Silver

Build Plates

plate_1.png

plate_1.png

plate_2.png

plate_2.png

plate_3.png

plate_3.png

Parts

Quantity Part Notes
4 16mm-off-white-ribbon-400mm
2 16mm-off-white-ribbon-600mm
4 m3-20-hex-screw Attn Josh: README said "20mm M3x8 hex screw" Assume this is M3x20? or is it M3x8?