73MM PG-15 Rocket
3D Prints > Projectiles > 73MM PG-15 Rocket
The 73MM PG-15 Rocket is a 17.08 hour print with an estimated cost to print of €8.26 + parts and labor.
- Connect
nosecone_cap.stltonosecone.stlandnosecone.stltonosecone_base.stlto create the warhead - Connect
coupler.stlto the base of the warhead - Connect
motor_tube.stltocoupler.stl - Connect
tailfin.stltomotor_tube.stl - Connect
tailfin_mount.stltotailfin.stl - Connect 6x
fin.stltotailfin_mount.stlusing the 10mm self-tapping screws to create the tailfin assembly (the thin edge of the fin blade should face towards the rocket when folded upwards) - Each fin also requires 1x self-tapping screw under it as a rest stop
- Connect
propellant.stlto the base oftailfin.stl
Known Issues
- Threaded connection between the tailfin and the propellant canister is not representative of the actual connection method
Changelog
2025-11-04
tailfin.stl3mf file updated, part prints with 100% infill
Copy object namekey for print order:
STL Files
Build Plates
plate_1.png
plate_2.png
plate_3.png
plate_4.png
plate_5.png
Parts
| Quantity | Part | Notes |
|---|---|---|
| 12 | m3-10-countersunk-hex-screw |