Skip to content

85mm PG-7V Rocket

3D Prints > RPG > 85mm PG-7V Rocket

The 85mm PG-7V Rocket is a 10.74 hour print with an estimated cost to print of €7.73 + parts and labor.

  • Connect nosecone.stl to nosecone_base.stl
  • Connect nozzle.stl to nosecone_base.stl
  • Connect fuze.stl to nosecone.stl
  • Insert motor_a.stl into motor_b.stl align the grooves to the tabs and press the two ends together until they snap and lock in place
  • Connect motor_nozzle.stl to motor_a.stl to create the motor assembly
  • Install M5x10x7 brass heat-set insert into motor_b.stl, screw M3x8mm hex screw and washer into motor_a.stl
  • Connect the motor assembly to the warhead
  • Connect 4x fin.stl to tailfin.stl using the 10mm self-tapping screws
  • Connect prop.stl to tailfin.stl to create the tailfin assembly
  • Connect the tailfin assembly to the rocket assembly to create the 85mm-pg-7v-rocket

Copy object namekey for print order:

85mm-pg-7v-rocket

STL Files

Image Part Name Filament
82mm-s-832s-mortar.md STL render pg7_fin.stl ■ Bambu PLA Basic Silver
82mm-s-832s-mortar.md STL render pg7_fuze.stl ■ Bambu PLA Basic Silver
82mm-s-832s-mortar.md STL render pg7_motor_tube_a.stl ■ Polymaker Polylite PLA Army Green
82mm-s-832s-mortar.md STL render pg7_motor_tube_b.stl ■ Polymaker Polylite PLA Army Green
82mm-s-832s-mortar.md STL render pg7_nosecone_base.stl ■ Polymaker Polylite PLA Army Green
82mm-s-832s-mortar.md STL render pg7_nosecone.stl ■ Polymaker Polylite PLA Army Green
82mm-s-832s-mortar.md STL render pg7_nozzle.stl ■ Polymaker Polylite PLA Army Green
82mm-s-832s-mortar.md STL render pg7_prop.stl ■ Bambu PLA Basic Silver
82mm-s-832s-mortar.md STL render pg7_tailfin.stl ■ Bambu PLA Basic Silver

Build Plates

plate_1.png

plate_1.png

plate_2.png

plate_2.png

plate_3.png

plate_3.png

Parts

Quantity Part Notes
4 m3-10-countersunk-screw
1 m3-8-hex-screw For motor_a.stl
1 m3-washer For motor_a.stl
1 m5-10-7-brass-heat-set-insert For motor_b.stl