Skip to content

93MM PG-7VL Rocket

3D Prints > RPG > 93MM PG-7VL Rocket

The 93MM PG-7VL Rocket is a 11.10 hour print with an estimated cost to print of €8.75 + parts and labor.

  • Connect fuze.stlto nosecone.stl and nosecone.stl to nosecone_base.stl to create the warhead
  • Connect fuze.stl
  • Insert motor_a.stl into motor_b.stl align the grooves to the tabs and press the two ends together until they snap and lock in place
  • Connect nozzle.stl to this to create the motor assembly
  • Connect the motor assembly to the warhead
  • Connect 4x fin.stl to tailfin.stl using the 10mm self-tapping screws
  • Connect prop.stl to tailfin.stl to create the tailfin assembly
  • Connect the tailfin assembly to the rocket assembly to create the 93mm-pg-7vl-rocket `

Copy object namekey for print order:

93mm-pg-7vl-rocket

STL Files

Image Part Name Filament
85mm-pg-7v-rocket.md STL render pg7_fin.stl ■ Bambu PLA Basic Silver
85mm-pg-7v-rocket.md STL render pg7_prop.stl ■ Bambu PLA Basic Silver
85mm-pg-7v-rocket.md STL render pg7_tailfin.stl ■ Bambu PLA Basic Silver
85mm-pg-7v-rocket.md STL render pg7l_fuze.stl ■ Bambu PLA Basic Silver
85mm-pg-7v-rocket.md STL render pg7l_motor_a_v2.stl ■ Polymaker Polylite PLA Army Green
85mm-pg-7v-rocket.md STL render pg7l_motor_b_v2.stl ■ Polymaker Polylite PLA Army Green
85mm-pg-7v-rocket.md STL render pg7l_nosecone_base.stl ■ Polymaker Polylite PLA Army Green
85mm-pg-7v-rocket.md STL render pg7l_nosecone.stl ■ Polymaker Polylite PLA Army Green
85mm-pg-7v-rocket.md STL render pg7l_nozzle_v2.stl ■ Polymaker Polylite PLA Army Green

Build Plates

plate_1.png

plate_1.png

plate_2.png

plate_2.png

plate_3.png

plate_3.png

Parts

Quantity Part Notes
0 placeholder None