Skip to content

AO-2.5 RT/RTM Submunition

3D Prints > Submunitions > AO-2.5 RT/RTM Submunition

The AO-2.5 RT/RTM Submunition is a 11.44 hour print with an estimated cost to print of €5.87 + parts and labor.

  • Connect 1x fuze_coupler.stl to each detonator_housing.stl and make sure to screw together completely
  • Connect 1x detonator_housing.stl to each half_shell.stl and make sure to screw together completely (a pen or screwdriver can help tightening the part)
  • Align the two tabs of each fin.stl with the two holes of fin_ring.stl and press firmly to snap the parts together
  • Snap the arming fins assembly over one of the half_shell.stl
  • Insert and press fuze.stl into fuze_housing.stl to create the fuze assembly
  • Place separation_charge.stl flat side down inside each fuze_coupler.stl and insert the fuze assembly above it
  • With all parts installed, press 1x half_shell.stl together with the other half_shell.stl for the complete submunition assembly

Known issues:

  • The replica fuze is an approximation of the original

  • The delay charge and detonator are currently not modeled as printable parts

Copy object namekey for print order:

ao-25-rt-rtm-submunition

STL Files

Image Part Name Filament
ao-1sch-submunition.md STL render ao25rt_detonator_housing.stl ■ Bambu PLA Basic Silver
ao-1sch-submunition.md STL render ao25rt_detonator.stl ■ eSUN Silk Silver
ao-1sch-submunition.md STL render ao25rt_fin_ring.stl ■ eSUN Silk Silver
ao-1sch-submunition.md STL render ao25rt_fin.stl ■ eSUN Silk Silver
ao-1sch-submunition.md STL render ao25rt_fuze_coupler.stl ■ eSUN Silk Silver
ao-1sch-submunition.md STL render ao25rt_fuze_housing.stl ■ eSUN Silk Silver
ao-1sch-submunition.md STL render ao25rt_fuze.stl ■ Bambu PLA Basic Silver
ao-1sch-submunition.md STL render ao25rt_half_shell.stl ■ eSUN Silk Silver
ao-1sch-submunition.md STL render ao25rt_separation_charge.stl ■ eSUN Silk Silver

Build Plates

plate_1.png

plate_1.png

plate_2.png

plate_2.png

plate_3.png

plate_3.png

plate_4.png

plate_4.png