Skip to content

M42 Submunition

3D Prints > Submunitions > M42 Submunition

The M42 Submunition is a 1.49 hour print with an estimated cost to print of €0.72 + parts and labor.

  • Insert shell_insert.stl into shell.stl using alignment tabs, with holes facing toward the holes at the top of the shell.
  • Slide top_mount_insert.stl through the center hole of top_mount.stl
  • Connect the top mount to the shell using 2x M3x30 screws until the part fits snugly. Do not overtighten or it will strip the threads.
  • Glue the ends of the ribbon loop together, punch a hole through both layers, and screw into the top mount through the center hole using 1x M3x30 screw.

Copy object namekey for print order:

m42-submunition

STL Files

Image Part Name Filament
m18-hand-grenade.md STL render shell-insert.stl ■ eSUN Silk Copper
m18-hand-grenade.md STL render shell.stl ■ Bambu PLA Metal Iron Gray Metallic
m18-hand-grenade.md STL render top-mount-insert.stl ■ Bambu PLA Basic Silver
m18-hand-grenade.md STL render top-mount.stl ■ Bambu PLA Basic Silver

Build Plates

plate_1.png

plate_1.png

plate_2.png

plate_2.png

plate_3.png

plate_3.png

Parts

Quantity Part Notes
1 16mm-off-white-ribbon-400mm
3 m3-30-hex-screw