ML-8 Firing Device
3D Prints > Landmine > ML-8 Firing Device
The ML-8 Firing Device is a 3.38 hour print with an estimated cost to print of €1.68 + parts and labor.
- Slide
ml8_cover.stlover the side ofml8_body.stland press together, it will snap in place over the two tabs - Connect
ml8_fuze.stltoml8_body.stl - Attach
ml8_cap.stltoml8_fuze.stl - Place
ml8_trigger.stlin the round slot on the top ofml8_body.stl, secure with glue gun - Attach
ml8_plate.stltoml8_body.stlusing the 15mm x 2mm wire hinges
Known Issues
- Depending on filament used, the threads for the shipping cap might need lubrication, do not overtighten
Copy object namekey for print order:
STL Files
Build Plates
plate_1.png
plate_2.png
plate_3.png
plate_4.png
Parts
| Quantity | Part | Notes |
|---|---|---|
| 2 | 2mm-metal-wire-15mm-length | Steel or aluminum wire for the hinges |