OZM-72 Landmine
3D Prints > Landmine > OZM-72 Landmine
The OZM-72 Landmine is a 5.61 hour print with an estimated cost to print of €5.36 + parts and labor.
- Insert
plug1.stlandplug2.stlin the outer holes on top ofbase_solid.stl(needle-nose pliers can be used as a tool for tightening the plugs) - Insert
center_plug.stlin the center hole ofbase_solid.stl - Connect a key-ring to the
center_plug.stl - Combine with
muv2_fuzeormuv4_fuze
Additional Part Required:
- Four-part print for the mine, also includes print files for the MUV-2 fuze
Copy object namekey for print order:
STL Files
Build Plates
plate_1.png
Parts
| Quantity | Part | Notes |
|---|---|---|
| 1 | 1pt6-x-25mm-metal-wire | |
| 2 | 30mm-key-ring |