PFM-1 Landmine
3D Prints > Landmine > PFM-1 Landmine
The PFM-1 Landmine is a 4.27 hour print with an estimated cost to print of €1.34 + parts and labor.
- Connect
fuze.stltobody.stl - Push
ring.stloverbody.stlwhere fuze is inserted - Cut a straight piece of approx. 15mm of 2mm wire and push down into fuze top with pliers
Known Issues
- Top of fuze can break if dropped
- Fuze threads can be slightly loose depending on filaments used, add small strip of masking tape to threads to create tighter fit
- Support interface sometimes sticks to surface when fuzzy skin is enabled. Gently remove with or cut with pliers
Copy object namekey for print order:
STL Files
| Image | Part Name | Filament |
|---|---|---|
|
pfm1_body_2025.stl | ■ Aurapol PLA Leaf Green |
|
pfm1_edge_mask.stl | ■ Non Printable Part |
|
pfm1_fuze_2025.stl | ■ eSUN Silk Silver |
|
pfm1_ring.stl | ■ eSUN Silk Silver |
Build Plates
plate_1.png
plate_2.png
plate_3.png
plate_4.png
Parts
| Quantity | Part | Notes |
|---|---|---|
| 1 | 2-x-10mm-metal-wire | aluminum or steel |