Skip to content

POM-2 Landmine

3D Prints > Submunitions > POM-2 Landmine

The POM-2 Landmine is a 5.31 hour print with an estimated cost to print of €2.91 + parts and labor.

  • Place fuze.stl on top of top.stl and connect with 2x M3 16mm screws from above
  • Place top_bracket.stl on top of fuze.stl and connect with 2x M3 16mm screws from each side, through the vertical tabs on top.stl to create fuze assembly
  • Connect each fin.stl to hinge_mount.stl with M3 20mm self-tapping screw. Note the orientation of hinges and fins (see detail in assembly_10.jpg) Screw must enter from right to left (see assembly_08.jpg)
  • Place fin assembly on top of base_plate.stl
  • Insert threaded end of shell.stl from above and screw together with light force (see detail in assembly_13.jpg)
  • Connect fuze assembly to shell.stl to complete the POM-2 landmine model

Copy object namekey for print order:

pom-2-landmine

STL Files

Image Part Name Filament
pmn-landmine.md STL render pom2_base_plate.stl ■ Bambu PLA Basic Silver
pmn-landmine.md STL render pom2_fin.stl ■ Polymaker Polylite PLA Army Green
pmn-landmine.md STL render pom2_fuze.stl ■ Bambu PLA Metal Iron Gray Metallic
pmn-landmine.md STL render pom2_hinge_mount.stl ■ Bambu PLA Basic Silver
pmn-landmine.md STL render pom2_shell.stl ■ Polymaker Polylite PLA Army Green
pmn-landmine.md STL render pom2_top_bracket.stl ■ Bambu PLA Basic Silver
pmn-landmine.md STL render pom2_top.stl ■ Bambu PLA Metal Iron Gray Metallic

Build Plates

plate_1.png

plate_1.png

plate_2.png

plate_2.png

plate_3.png

plate_3.png

Parts

Quantity Part Notes
4 m3-16-countersunk-screw
6 m3-20-countersunk-screw