POM-3 Landmine
3D Prints > Submunitions > POM-3 Landmine
The POM-3 Landmine is a 7.03 hour print with an estimated cost to print of €4.13 + parts and labor.
-
Stack in this order and screw these three parts together with 3x M3x14 screws,
-
fuze_cap_top.stl optional parachute clip(insert first before attaching screws)fuze_cap_midsection.stl-
fuze_cap_base.stl -
Connect the fins to the
hinge_mount.stl. For step by step assembly see photosassembly_11.jpgthroughassembly_17.jpg. Note two fins have a different shape (photoassembly_17.jpg)Parts needed:
-
hinge_mount.stl hinge_ring.stl- 4x
fin.stl - 1x
fin_left.stl -
1x
fin_right.stl -
Connect hinge assembly to
tube.stlusingbaseplate.stl. Sensor connector should be pointing upwards -
Connect
sensor_tube.stlto the sensor connector of the hinge assembly, with the hole toward the base -
Connect
fuze_attachment.stltofuze.stlusing 2x M3x10mm screws -
Insert the fuze assembly into both the tube and the sensor tube
-
Place the fuze-cap assembly on top of the fuze assembly
-
Insert
sensor_4mm.stlinto the underside ofhinge_mount.stlbeneath thesensor_tube.stlattachment point
Known Issues
- The overall scale of the model and some details deviate slightly from the FFE scan model
Changelog
2025-11-04
fuze_attachment.stl- updated: stl, readme
Copy object namekey for print order:
STL Files
Build Plates
plate_1.png
plate_2.png
plate_3.png
plate_4.png
plate_5.png
Parts
| Quantity | Part | Notes |
|---|---|---|
| 1 | 2mm-metal-wire-100mm-length | Optional. Steel or aluminum wire for the parachute connection |
| 2 | m3-10-countersunk-hex-screw | |
| 3 | m3-14-countersunk-hex-screw |