PTAB-1M Submunition
3D Prints > Submunitions > PTAB-1M Submunition
The PTAB-1M Submunition is a 6.12 hour print with an estimated cost to print of €3.33 + parts and labor.
- Slide the first
fin.stlon tofin_mount.stlfrom above, it should extend in a clockwise direction - Insert curved end of second
fin.stlthrough opening in the prevous attached fin and slide on tofin_mount.stl - Continue for all 6x
fin.stl. To complete the assembly the end of the first fin must be removed from the mount to slide into the opening of the sixth fin (see diagram) - Insert
fin_mount_screw.stlintofin_mount.stlfrom above - Gently push and snap
fin_mount.stlon topayload_a.stl(apply glue to the connection to keep from rotating) - Connect
payload_a.stltopayload_b.stl - Connect
base.stltopayload_b.stl
Known issues
- Gently and slowly flex the fins when attaching to prevent from snapping
Copy object namekey for print order:
STL Files
Build Plates
plate_1.png
plate_2.png
plate_3.png