Skip to content

PTM-3 Landmine

3D Prints > Submunitions > PTM-3 Landmine

The PTM-3 Landmine is a 12.61 hour print with an estimated cost to print of €10.26 + parts and labor.

  • Screw fuze_insert.stl into the top of fuze.stl
  • Connect battery_cover.stl to the side of fuze.stl (use needlenose pliers to assist)
  • Insert x4 alignment tabs into the open end of mine_body_base.stl and connect mine_body_top.stl
  • Screw x4 M3x18mm screws to secure mine_body_top.stl to mine_body_base.stl
  • Carefully insert fuze.stl into the open end of mine_body_top.stl

Known Issues

  • The vertical tabs near the fuze on mine_body_top.stl can snap off. This part can be re-printed and replaced.

Copy object namekey for print order:

ptm-3-landmine

STL Files

Image Part Name Filament
ptm-1-landmine.md STL render ptm3_fuze_insert.stl ■ Bambu PLA Basic Silver
ptm-1-landmine.md STL render ptm3_fuze.stl ■ Bambu PLA Basic Silver
ptm-1-landmine.md STL render ptm3_mine_body_base.stl ■ Polymaker Polylite PLA Army Green
ptm-1-landmine.md STL render ptm3_mine_body_top.stl ■ Polymaker Polylite PLA Army Green
ptm-1-landmine.md STL render ptm3_tab.stl ■ Polymaker Polylite PLA Army Green
ptm-1-landmine.md STL render ptm3_battery_cover.stl ■ Bambu PLA Basic Silver

Build Plates

plate_1.png

plate_1.png

plate_2.png

plate_2.png

plate_3.png

plate_3.png

Parts

Quantity Part Notes
4 m3-18-hex-screw