PTM-4 Landmine
3D Prints > Submunitions > PTM-4 Landmine
The PTM-4 Landmine is a 8.76 hour print with an estimated cost to print of €6.32 + parts and labor.
- Connect
payload_a.stltopayload_b.stlusing four self-tapping screws to create the payload assembly - OPTIONAL - fill
payload_b.stlwith sand or rice for added weight - Slide the
fuze_cover.stlover the top offuze.stl - Attach the
fuze_lock.stlto thefuze.stlwith the pin - Connect
fuze_insert.stltofuze.stlusing two self-tapping screw to create the fuze assembly. Gluefuze.stlinto the center hole offuze_insert.stl - Slide the fuze assembly in to the payload assembly (friction-fit)
Known Issues
- Fuze cover slightly loose
- Friction fit of payload_a needs a re-print
- Small gap between payload sections
- Missing wire frame and attachments for the cover
Copy object namekey for print order:
STL Files
Build Plates
plate_1.png
plate_2.png
plate_3.png
plate_4.png
Parts
| Quantity | Part | Notes |
|---|---|---|
| 1 | 1pt6x15mm-pin | |
| 4 | m3-8-hex-screw |