RGN Hand Grenade
3D Prints > Hand Grenades > RGN Hand Grenade
The RGN Hand Grenade is a 5.50 hour print with an estimated cost to print of €3.45 + parts and labor.
Removable base allows for multiple configurations of the grenade. The snap-shell-top and snap-shell-base can lock together or release with a quarter-turn. If the fit is loose, some small pieces of masking tape along the inner edge can help to tighten up the joint.
- Connect
rgn_snap_shell_base.stltorgn_snap_shell_top.stlby aligning the two tabs to the notches, press together and twist clockwise a quarter turn until the parts snap together - Connect
rgn_fuze_threads.stltorgn_fuze_top.stl - Insert
rgn_fuze_insert.stlinto the front ofrgn_fuze_top.stl - Attach
rgn_fuze_handle.stltorgn_fuze_top.stl, align holes and secure with pin and attach key-ring - Connect fuze assembly to grenade base
Note:
- Geometry on rgn_snap_shell_top_v2.stlis modified for printability and no longer 1:1.
Known issues
- Support filament can be tricky to remove from upper fuze
- Overtightening can break or strip threads
- Modify
rgn_snap_shell_top_v2with screw threads and support material to retain original geometry
Copy object namekey for print order:
STL Files
Build Plates
plate_1.png
plate_2.png
plate_3.png
plate_4.png
Parts
| Quantity | Part | Notes |
|---|---|---|
| 1 | 1pt6-x-30mm-pin | |
| 1 | 30mm-key-ring |