Skip to content

TMRP-6 Landmine

3D Prints > Landmine > TMRP-6 Landmine

The TMRP-6 Landmine is a 5.92 hour print with an estimated cost to print of €4.32 + parts and labor.

  • Place mine-base.stl on the bottom of mine-body.stl, and slowly screw together
  • Connect fuzewell.stl to the top of mine-body.stl
  • Lightly pull apart the two ends of safetyring.stl and with the small notch facing downward, place around fuzewell.stl
  • Attach pull-ring and pin to safetyring.stl
  • Connect fuze.stl to fuzewell.stl
  • Connect fuzetrigger.stl and fuzepin.stl to fuze.stl
  • Attach optional part fuzesafety.stl to fuzetrigger.stl, rotate to secure fuzepin.stl in the unarmed position
  • Place handle_part1.stl on top of handle_part2.stl and connect using 2x handle_pin.stl
  • Connect the handle to mine-body.stl

Copy object namekey for print order:

tmrp-6-landmine

STL Files

Image Part Name Filament
tm-62p3-landmine.md STL render tmrp-6-landmine_fuzebody.stl ■ eSUN PLA+ Olive Green
tm-62p3-landmine.md STL render tmrp-6-landmine_fuzesafety.stl ■ Bambu PLA Basic Black
tm-62p3-landmine.md STL render tmrp-6-landmine_fuzetrigger.stl ■ eSUN Silk Silver
tm-62p3-landmine.md STL render tmrp-6-landmine_fuzewell.stl ■ eSUN PLA+ Olive Green
tm-62p3-landmine.md STL render tmrp-6-landmine_handle_part1.stl ■ eSUN PLA+ Olive Green
tm-62p3-landmine.md STL render tmrp-6-landmine_handle_part2.stl ■ eSUN PLA+ Olive Green
tm-62p3-landmine.md STL render tmrp-6-landmine_handle_pin.stl ■ eSUN PLA+ Olive Green
tm-62p3-landmine.md STL render tmrp-6-landmine_mine-base.stl ■ eSUN PLA+ Olive Green
tm-62p3-landmine.md STL render tmrp-6-landmine_mine-body.stl ■ eSUN PLA+ Olive Green
tm-62p3-landmine.md STL render tmrp-6-landmine_safetyring.stl ■ eSUN PLA+ Olive Green
tm-62p3-landmine.md STL render tmrp-6-landmine-fuzepin.stl ■ eSUN PLA+ Olive Green

Build Plates